Your drawings in.
A finished takeoff back.
Send me a drawing set. It comes back as a priced takeoff and a draft contract — usually within a day. You review it and send the bid.
Built inside a live GTA electrical contractor over eight weeks — not a demo.
lighting-L2.pdf · 14 sheets
Sample| Device | Qty | Total |
|---|---|---|
| 2×4 LED troffer | 48 | $8,928 |
| Occupancy sensor | 22 | $1,628 |
| EM exit sign | 9 | $1,278 |
| 20A duplex receptacle | 58 | $1,798 |
| Panel LP-2 feeder — size unclear | ? | — |
Every bid starts with somebody counting by hand.
The drawing set lands. Your estimator opens the first sheet and starts the tally: every outlet, every light, every switch. Then they go over it again, because a device missed on the takeoff is a device you install for free.
- 2–3 hoursto count one takeoff by hand, as Alton’s estimators report
- Maybe 1 in 5bids won, for most contractors. The other counts are for jobs someone else gets.
Your estimator counts every outlet, light and switch by hand. It doesn’t have to.
I spent eight weeks inside an electrical contractor’s business.
Alton Electric bids electrical work across the GTA. In the summer of 2026 they built their own estimating software, ElectricBid Pro, with a team of six engineers. I was one of them, and I built the part that reads the drawings.
Up close, the slow part wasn’t the people. It was the drawings.
Not every sheet is worth counting
A drawing set mixes sheets you count with sheets you skip. Someone has to sort them first.
The symbols are tiny
An outlet or a switch is a small mark on a big sheet. Miss one, or count one twice, and the takeoff is off.
The numbers lived in scattered files
Estimating data sat in local files, not in one place the whole team could work from.
The computer does the counting. Your estimator makes the call.
This isn’t about replacing anyone. The slow part of a takeoff was never the judgment. It was the tally.
So at Alton, the system took the tally. It sorted the pages, zoomed in one small section at a time, and counted a symbol once even when it sat across two sections. The count flowed straight into a draft contract, so nobody retyped quantities. Then every count came back to the estimator, with anything uncertain flagged. Nothing went out until a person approved it.
Your estimator stops tallying and starts deciding.
The system does the tally
- Sorts the sheets worth counting
- Counts every device, one small section at a time
- Drafts the takeoff and the contract
Hands over a draft, never a decision
Your estimator makes every call
- Checks anything flagged as unsure
- Corrects, adjusts, adds what only they know
- Approves it, or it doesn't go out
The bid goes out with your name on it
For you, it’s three steps. Nothing changes on your side.
Send me a set
Email me a PDF drawing set. No new software, and no change to how your estimators already work.
It gets read
Every sheet is read one small section at a time. Devices are counted, matched to your price list and assembled into the takeoff.
You review and send
An itemised takeoff and a draft contract come back, usually within a day. Anything the system wasn’t sure about is flagged for you to check. You approve it before it goes anywhere.
The free audit is the count. Pricing it against your price list and drafting the contract is the paid work.
Before it shipped, I counted a sheet by hand to check it.
I didn’t want to take the computer’s word for it. I took a real electrical drawing sheet from a live tender set and counted it myself: 15 device types, 39 devices. Then I ran each setting three times against my count.
9 sections — what we almost shipped
4 sections — what we shipped
We changed the default before release. The whole test cost $1.22. The system is now in use on Alton’s live bids. Alton’s estimators report that counting a takeoff by hand takes 2 to 3 hours. With the system, the count and a draft contract take 5 to 10 minutes.
One hand-counted drawing is a small test. That’s why I run the same check on your drawings before you rely on a single number.
How it ended: five stars from the client.
“He didn’t pick the fancy-sounding answer; he picked the one that was actually right, and he proved it.”
“Charles was one of the engineers I leaned on most, and the quality of both his work and his judgment stood out from the start.”
Densley ThomasPresident, Alton Electric Contracting Inc.LinkedIn recommendation · September 2026“When something broke, he found the real cause instead of just covering it up. He was steady, careful, and easy to work with.”
Densley ThomasPresident, Alton Electric Contracting Inc.LinkedIn recommendation · September 2026Your drawing set could be the next chapter.
Send me one drawing set.
I’ll send back the audit.
First one’s on me. Leave your name and email, I’ll reply so you can send the PDF, and you get the device count back, with every count showing where on the sheet it came from. Pricing it and drafting the contract is the paid work. If the count is useful, we book thirty minutes.